With a working width of 1400 mm, HP6000 is suitable to clean urban areas, such as roads or parking spaces and industrial areas, such as metallurgy plants and cement factories; the Twin Action system allows operation even on bumpy road surfaces, since no rigid element is in contact with the ground. As a consequence tree roots or protruding manholes are not a problem. Moreover the hydraulic support and the presence of the flaps, ensure a constant pressure on the ground for the brush independently of wear or the terrain, for maximum cleaning results.
HP6000 combines the performance of two machines in one single machine, thus providing two actions in one solution and ensuring maximum quality results.
Comac has designed a unique system which combines the strength of mechanical action to collect larger waste and the efficiency of the suction action for dust, to provide excellent results, with one machine, in a single pass.
Common Characteristics
The powerful Twin Action System vacuums also the fine dust PM10 and reduces water consumption, facilitating use even in the most difficult conditions. It can save up to 100.000 litres of water per year.
HP6000 uses the central brush continuously, thereby ensuring higher quality cleaning because it is uniform for the entire width of the brush. The side brushes are used only to convey the dirt from the edges to the operating area of the central brush, which collects both debris and dust thanks to the highly efficient suction action. The third brush (optional) allows to reach areas far from the machine, like on sidewalks.
HP6000 is equipped with a VM R754, which is specifically sized for continuous applications at constant speed with reduced consumption. It can work even for more consecutive shifts.
The large filtering surface and the efficiency of the dusty air intake distribution system over the entire surface, ensure continuity of performance over time: these characteristic together with the materials chosen (polyester) and the action of the two filter shaking, ensure the return of perfectly clean air into the environment.
Four-wheel steering system
The four-wheel steering system provides great manoeuvrability to operate in places where space is limited such as near walls or fences, in historical town centers or cluttered areas, at the same time guaranteeing maximum vehicle stability during transfer even at the highest speed.
Vehicle height control
Comac has produced a special device which, acting separately on the four wheels, maintains constant the height from the ground, optimizing work and stability, even when the load varies. The operator can position the machine on three different pre-established levels in order to meet various needs: working position, moving position, maintenance position.
Technical Data
| Parameter | Value |
|---|
| Central brush working width | 1400
mm |
| Working width with two side brushes | 2220
mm |
| Working width with 2 brushes+third front brush | 3450
mm |
| Cylindrical central brush diameter | 600
mm |
| Side disc brushes diameter | 850
mm |
| Waste hopper volume | 6000
l |
| Max. hopper dumping height | 1820
mm |
| Air flow | 14000
m3/h |
| Filtering surface | 50
m2 |
| Suction motor rated power | 45
kW |
| Maximum speed | 40
km/h |
| Maximum gradient (empty) | 20
% |
| Engine | VM-EU6
|
| Fuel | Diesel
|
| Engine power | 143/105
HP/kW |
| Displacement | 4455
cm3 |
| Engine revolutions | 2300
rpm |
| Machine length with side brushes | 5250
mm |
| Machine length with side brushes + third brush | 5880
mm |
| Machine width | 2000
mm |
| Machine height when in operation | 2950
mm |
| Machine height in transfer | 3000
mm |
| Machine weight in running order | 12100
kg |
| Turning radius | 4850
mm |
| Wheels | 285/70 R19,5
|
| Fuel tank capacity | 160
l |
| Water tank capacity | 200
l |