Automatic bandsaw FMB JUPITER+CN

• Head structure in 3 parts: special aluminium alloy, steel and cast iron.
• Dynamometric blade tensioning. Broken blade micro and blade rotation sensor.
• Head feeding system with hydraulic cylinder and front balanced valve for feeding regulation and cutting optimizing.
• Basementwith places for the lifting with forklift.
• Sensor for the recognition of the head starting position after the cut.
• Improved protection barriers with easy access in the posterior part for the blade changeand other operations.
• Electrical cabinet, valve for head descent regulation and cleaning gun in frontalergonomic position.
• Blade guide with combined action of side bearings, carbide plates and top bearing.
• Direct drive: Reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease.
• Blade speed regulation with frequency variator (inverter) VHZ.
• Blade cleaning brush driven by motor gearbox.
• Material clamping vice with manual positioning with hydraulic locking cylinder.
• Cutting vice plate and carriage vice equipped with replaceable hardened plugs to protect the material supporting surface.
• Ergonomic working table and control panel.
• Head rotation with measuring stops at 0°, 45° and 60°, graduated scale for angle measuring and rugged in construction lever.
• 600 mm long connected to the basement roller table to support material on loading side.
• Carriage vice for material feeding equipped with hydraulic cylinder and self-centric device for not straight bars.
• Sliding on chromate columns, useful feeding of 510 mm (and of 1005 mm for C 1000 version).
• Material lacking micro placed on the carriage vice.
• 300 mm cutting final scrap.
• Measuring system with positioning draught through a trapezoidal screw and a double micro system for the carriage vice slowing-down and stopping (tolerance ± 0,2 mm).
• Heavy duty basement with sheet metal construction in different thickness, chips holding system and integrated coolant tank.
• Electric pump for cooling both blade guides.
• Hydraulic unit for the head, the vice and the feeding carriage cylinders power supply.
• Electrical cabinet with 24VAC auxiliary tension and main switch.
• Digital control panel to check all the machine functions, cutting cycles programs and auto diagnostic function.
• Total protection against highest voltage and short circuit current. Protection level IP 55.
• Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-220V/60Hz/3Ph-440V/60Hz/3Ph available).
• Machine colours: yellow RAL 1018 and grey RAL 7036.