Manual band saw machine to cut from 0° to 60° right. (Manual/Gravitational for version +G).
Common Characteristics
• Head structure in special aluminium casting alloy.
• Dynamometric blade tensioning.
• Head handgrip with integrated cycle button.
• Blade guide with combined action of side bearings, carbide plates and top bearing.
• Direct drive: reduction gear box with inclined grinded case hardened teeth lubricated with long lasting grease. (Inverter for speed choice 16-120 m/min for version +VHZ).
• Material clamping vice with manual positioning and fast clamping system.
• Ergonomic working table and control panel.
• Head rotation angle stop at 0° and 60°.
• Degrees measuring system, graduated scale and rugged in construction locking lever.
• Millimetric reference length stop measuring system. Cutting length 0-600 mm.
• Heavy duty basement with sheets metal construction in different thickness, chips holding sides.
• 12 l coolant tank integrated in the upper part of the basement.
• Hydraulic cooling pump in the back of the basement for feeding both blade guides.
• Electrical cabinet with 24VAC, main switch and electric drives.
• Total protection against highest voltage and short circuit current. Protection level IP 55.
• Line voltage: 400V/50Hz/3Ph standard (230V/50Hz/1Ph-230V/50Hz/3Ph-110V/60Hz/1Ph- 220V/60Hz/3Ph-440V/60Hz/3Ph-575V/60Hz/3Ph available).
• Machine colours: yellow RAL 1018 and grey RAL 7036.
Technical Data
| Parameter | Value |
|---|
| Cutting capacity at 0° Round/Sq/Rect | 220/215/130x250
mm |
| Cutting capacity at 45° for Round/Sq/Rect | 150/150/150x150
mm |
| Cutting capacity at 60° for Round/Sq/Rect | 90/90/90x90
mm |