Manual bandsaw or with gravity lowering mitre cutting from 0° to 60° left.
Common Characteristics
Vice with quick clamping. Easy stops at 0°, 45° and 60° left, graduated plate to identify different angles.
Band guides with bearings for blade alignment, pulleys with 260 mm diameter.
AUTOCUT GH Version with “3 Ways” Selector:
- A Manual cut.
- B Manual cut with self-brake.
- C Automatic cut with adjustable down-feed rate and stop at the end of the cut. The user can move manually the sawframe close to the material,then let the machine make the cut adjusting only the down-feed rate.
Cutting capacity at 90° round till 220 mm., square till 210 mm. e rectangular till 250x110 mm.
Technical Data
| Parameter | Value |
|---|
| Material type | профили и плътни материали
|
| Cutting angle | до 60°
|
| Direction of cutting | наляво
|
| Cutting capacity at 0° Round | 220 mm
|
| Cutting capacity at 0° Square | 210 mm
|
| Cutting capacity at 0° Rectangular | 230x185 mm; 250х110 mm
|
| Cutting capacity at 45° Round | 150 mm
|
| Cutting capacity at 45° Square | 150 mm
|
| Cutting capacity at 45° Rectangular | 150x210 mm
|
| Cutting capacity at 60° Round | 90 mm
|
| Cutting capacity at 60° Square | 90 mm
|
| Cutting capacity at 60° Rectangular | 90x100 mm
|
| Weight | 240 kg
|
| Width | 680mm
|
| Length | 1400mm
|
| Height | 1800mm
|
| Blade size | 2455x27x0.9 mm
|
| Blade motor | 1.2 KW
|
| Blade speed | 35-70 m/min
|
| Working table height | 900 mm
|
| Blade tension | 1500 kg / cm?
|