With respect to its structural and dynamic properties the RUR CNC cutting machine is suitable not only for oxy fuel and conventional plasma cutting but also for High Definition plasma cutting. The RUR is characterized by a substantial fully welded machine frame using a digitally synchronized twin side motion control system fitted to both longitudinal rails of the machine. The machine also incorporates a high level of dynamic automation.
Common Characteristics
Basic equipment
• fully welded beam without bolted joints
• linear bearing in cross axis
• NEW AC servo-drive system (12 000 mm/min.)
• digital synchronisation in longitudinal axis
• NEW PIERCE 15“ control system with touch screen
• floating cutting heads
• electric ignition
• capacitive height control of oxy torch
• automatic piercing with HI-LOW preheating
• automatic initial height sensing of plasma torch
• arc voltage height control of plasma torch
• parking for 1 head out of cutting area
• limit switch protection in each axis
Optional equipment
• NEW PIERCE 19“ control system with touch screen
• plasma system by customer request
• linear bearing in longitudinal axis
• NEW AC servo-drive system (20 000 mm/min.)
• automatic gas console
• torch selection from control panel
• anti-collision system
• pneumatic, plasma or ink jet marker
• air cooling of portal frame
• control system heating (for winter operation)
• parking space for 3 torches
Technical Data
| Parameter | Value |
|---|
| Max. number of torches | 4
бр / pcs |
| Rail span | 2500 - 4000
mm |
| Cutting width * - 1 torch | 2200 - 3700
mm |
| Cutting length | по желание на клиента/at customer's request
mm |
| Min. parallel cut | 90
mm |
| Cutting speed | 0-1200 (20000)
mm/min |
| Standard cutting thickness | до 200
mm |
| Machine width | 3340 - 4840
mm |
| Machine width with 3 torches parking | +300
mm |
| Machine height incl. rails | 1700
mm |
| Cutting table height | 700
mm |
| Plasma system | по желание на клиента/at customer's request
|
| Voltage supply | 230
V |