E-shop

Carbide Burrs

Band Saw Blades for Metal

Cutting and Grinding Wheels

Lamellar Flap Discs

Holesaws and Accssories

Reciprocating Sawblades

Circular Saw Blades

Power and Hand Hacksaw Blades

Blade for Fret Saws

Brushes with Knotted Wire and Brushes with Crimped Wire

Wheel Brushes with Abrasive Filament

Polishing Pastes

Carbide burr cylindrical round nose Lukas C HFC 0616.06 Z9

Cylindrical carbideburr LUKAS round nose. Z9 is very coarse single cut with faceting for soft materials.

Carbide burr oval Lukas HFE 1220.06 ZX

Oval carbide burr LUKAS, ZX universal cut . Available on diameter 3 to 20 mm with single and cross cut, ...

Carbide burr arch pointed nose Lukas HFG 0613.03 Z7

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr oval Lukas HFE 1220.06 Z3

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels.

Carbide burr cylindrical arch pointed nose Lukas HFC 1225.06 Z1

The burr is suitable plastic, wood, rubber.

Carbide burr arch pointed nose Lukas М HFM 1225.06 ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr spherical Lukas HFD 1210.06 ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burrarch pointed nose Lukas HFG 1225.06 ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr Inverted cone Lukas N HFN 0307.03 Z7

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr arch pointed nose Lukas HFM 0613.03 Z7

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr flame Lukas HFF 0613.03 Z7

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr conical pointed nose HFM 1225.06 Z7

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr flame Lukas HFF 1230.08 L Z3 SL 200

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr conical pointed nose Lukas HFM 0820.06 Z3

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burrs HFA Lukas Z3, Z4, Z5, Z7

For these burrs are used electric and pneumatic power tools; the bearings should be in good condition ...

Carbide burr cylindrical Lukas HFA 0313.03 BASE-X ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr spherical Lukas HFD 1009.06 BASE-X ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr cylindrical Lukas HFAS 0313.03. Z7

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr arch pointed nose Lukas М HFM 1020.08 Z3

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr conical arch point nose Lukas HFM 0613.03 ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr conical round nose Lukas HFM 0618.06 BASE-X ZX

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr cylindrical arch pointed nose Lukas C HFC 1020.06 ZX

The burr is used for cutting steel, hardened steels, tool steel, cast iron.

Carbide burr arch pointed nose Lukas HFG 0313.03 Z5

The burr is suitable for steels and cast steels, alloyed, tempered steels, tool steels.

Carbide burr arch pointed nose Lukas HFM 0311.03 Z5

This burr is characterized by a universal cross cut, for every application. It is used for cutting steel, ...

Carbide burr Lukas HFG 0618.06 Z7 TiAIN

The burr with sharp peak is suitable for high alloy steels, stainless steel, acid-resistant and heat-resistant ...

Carbide burr Lukas A HFA 1225.06

Suitable for steels and cast steels, alloyed, tempered steels, tool steels, cast iron.

Carbide burr Lukas A HFА 1625.06 Z7

Suitable for steel castings, welds, hardened and soft steels (universal) .

Carbide burr Lukas HFN 1213.06 Z4

The burr is suitable for stainless steel, acid-resistant and heat-resistant castings, plastic

Carbide burr Lukas HFG 1225.06 Z4

The burr is suitable for high alloy steels, stainless steel, acid-resistant and heat-resistant castings, ...

Carbide burr Lukas HFF 1020.06 Z4

The burr is used for stainless steel, acid-resistant and heat-resistant castings, plastic.

Carbide burr Lukas HFA 1225.06 Z4

The burr is suitable for high alloy steels, stainless steel, acid-resistant and heat-resistant castings, ...

Carbide burr spherical Lukas HFD 1614.08 Z3

The burr is suitable for steel castings, welds, hardened and soft high-strength steels.It is used for ...

Carbide burr Lukas HFA 1625.06 Z3

The burr is suitable for steel castings, welds, hardened and soft high-strength steels.

Carbide burr Lukas HFD 2018.08 Z3

The burr is suitable for steel castings, welds, hardened and soft high-strength steels.

Carbide burr Lukas HFA 1225.06 Z5

The burr is suitable for steel castings, welds, hardened and soft high-strength steels.It is used for ...

Carbide burr Lukas HFG 1220.06 Z3

The burr is suitable for steel castings, welds, hardened and soft high-strength steels.

Page1

from2