Ultima-TIG-S - high-quality Tungsten electrode grinding
Common Characteristics
Environmentally friendly and safe
Ultima-TIG-S is the environmentally friendly wet grinder of Tungsten electrodes for TIG welding, with minimal wastage of the expensive electrodes. Ultima-TIG-S is constructed with a unique disposable container that automatically collects the toxic dust particles and ensures safe disposal.
Wet grinding
The combination of liquid for cooling and a high grinding speed of the diamond disc results in a polished and even surface of the Tungsten electrode. In addition, the cool wet grinding shortens the grinding time and prevents overheated and damaged electrodes.
Cost-effective in high-quality
Ultima-TIG-S’ unique construction reduces the waste of expensive Tungsten electrodes and reduces the time spent on grinding, resulting in a short payback time. The variable angle adjustment and unique clamping system centres the electrode, so that the grinding is carried out in the correct longitudinal direction of the electrode. A precise angle is not only important for the quality of the welding seam; the number of re-ignitions between re-grinding is also increased.
Simple operation
Set the variable angle setting at the desired angle. Place the electrode in the electrode holder and tighten it in the stick-out. Insert the electrode holder, turn on the grinder and rotate the electrode holder until grinding is ?nished. After grinding, ?atten the tip by placing the angle adjustment in the 90° position, if needed.
Main features of Ultima-TIG-S
• Sealed grinding chamber with dust collector to protect the user
• Variable angle setting gives more flexibility
• Wet grinding prevents overheating of the electrode during grinding
• High grinding speed provides faster grinding and a smooth surface
• The electrode holder ensures centring of the tip and reduces waste
• Less electrode waste results in a short payback time
Standard unit includes
• Grinder complete with table, diamond disc and grinding liquid
• Electrode holder up to O 4 mm
• Electrode holder O 4.8 to 8.0 mm
• Electrode clamps for O1.6, 2.4, 3.2, 4.8, 5.3, and 6.4 mm electrodes
Accessories
• Electrode clamps for all diameters from O 0.8 to 8.0 mm
• Electrode clamps for grinding short electrodes down to 8 mm
Grinder facts
Electrode size: O0.8 - 8.0 mm
Min. length: 15 mm standard
(8 mm with special clamps)
Angles: 7.5° - 90° grinding angle
(equal to 15° - 180° tip angle)