Inverter DIGITECH 3200VP2 PREMIUM full set with special processes

DIGITECH VP2 equipment are characterized by a synergic digital control to automatically determine the best welding parameters, based on the used type of material, wire diameter and gas.
DIGITECH VP2 innovative digital control with colour display fully meets the needs of combining synergy with the total control of all the welding parameters, for a far more modern and effective approach to welding. DIGITECH 3200 VP2 is designed with a built-in feeder.

CEA DIGITECH 3200 VP2 provides high quality welding in the following methods:
- MMA
- TIG
- MIG / MAG
- Pulse MIG / MAG
- Dual Pulsed

DIGITECH 3200 VP2 PREMIUM is equipped with the full range of welding functions offered by CEA:
- vision.ARC2 - arc control software function to achieve a more perfect and stable arc, together with superior pulse control correction.
- VISION.PULSE - allows pulse welding with a short arc that is constantly adjusted by optimizing the results of traditional pulse welding.
- DUAL PULSE - double pulse, which favors a further reduction in heat input into the material being processed, reducing its deformation. The double pulse is extremely useful especially when welding aluminum and stainless steel.
- visionPIPE - MIG/MAG process developed by CEA for root seams in butt welds of pipes in all positions.
- vision.COLD MIG/MAG process with low heat input, developed by CEA for welding thin-walled materials, coated materials and brazing, in all welding positions.
- vision.ULTRASPEED – MIG/MAG process for welding steel and non-ferrous metals thanks to the greater concentration of the arc, allows a significant increase in welding speed.
- visionPOWER - a process for increasing the penetration when welding steels and non-ferrous metals of medium and large thicknesses
- vision.PULSE-UP- a special process designed for vertical upward welding. The process is a combination of pulse and special MIG processes, allowing to achieve the so-called “Herringbone” without the use of oscillating movements during welding.
- vision.PULSE-POWER- a process for increasing the penetration when welding steels and non-ferrous metals of medium and large thicknesses, when deep penetration and a smooth seam are required.
- vision.PULSE-RUN - a special process combining the advantages of pulse welding together with a faster travel speed, when welding alloyed or low-alloyed steel and aluminum.
- vision.ULTRASPEED allows to reduce heat input and increase welding speed, thus obtaining a well-sized seam without defects.
- "WSC - WIRE START CONTROL" function - control when starting the wire feed. Prevents the wire from sticking to the workpiece or the torch nozzle and always ensures a precise arc with soft ignition.
- "BURN BACK CONTROL" function at the end of each welding seam, in any conditions and metal, the digital control ensures a perfect "cutting" of the wire, thus avoiding the formation of the typical weld bead and thus ensuring the best subsequent ignition of the arc.


Advantages:
• Digital control of welding parameters with synergic curves, preset according to the type of material, gas and wire diameter used.
• LCD color display
• Ability to save up to 99 own programs
• Intelligent “PROGRAM” button for quick selection of each program.
• “Energy saving” function, to activate the cooling fan only when necessary
• Ability to partially or completely lock the equipment using an access password
• Reduced energy consumption
• Automatic diagnostics for troubleshooting
• VRD function – to reduce the open circuit voltage below 12V.
• ETHERNET LAN – USB connection to any network for connecting the equipment and software support.
• Suitable for working with Industry 4.0 software

The set includes:

Inverter DIGITECH 3200VP2 PREMIUM (CEAW-2345)
Water cooling equipment HR 31 (CEAW-2009)
MIG/MAG torch MXL 411W 4m EURO (ESAB-4820)
Ground cable with clamp 50 mm2, 5m (TRAF-2706)